Lightweight AAC Block Machine, Autoclaved Aerated Concrete Block Machine, AAC Plant

• Customization: Available
• After-sales Service: Available
• Warranty: Available
• Model NO.: 50, 000-300, 000 m3 per year
• Certification: CE
• Customized: Customized
• Automatic Grade: Automatic
• Name: AAC Block Machine
• Brand: Dongfeng
• Capacity: 30000-300000cbm Per Year
• Raw Material: Fly Ash, Cement, Lime, Sand, Gypsum
• Motor: Siemens
• Sizes of AAC Blocsk: Customized
• Workers: 10-15 Persons
• Land Required: Depending on The Capacity
• Automatic: Full Automatic
• Manufacturing: Curing Steam
• Transportation: Containers,Bulk Cargo
• Package: Standard
• Transport Package: by Containers
• Specification: customized
• Trademark: Dongfeng
• Origin: Shandong, China
• HS Code: 8474809090
• Production Capacity: 50000-300000 Cubic Meter Per Year AAC Blocks
• Package Size: 300.00cm * 200.00cm * 210.00cm
• Package Gross Weight: 10000.000kg

Product Description

AAC Blocks Introduction:

AAC (autoclaved aerated concrete) block is made mainly of sand / flyash,cement,aluminium,lime,gypsum, under the
high temperature ,high pressure and steam curing . It's a new type building materials ,has its incomparable advantages ;

1. Lightweight: Porosity achieve 70% to 85%, volume density is generally 500-900kg/m3, as 1/5 of general concrete brick, the 1/4of clay brick, the 1/3 of hollow brick, and similar to the  wood which can float in water. It can reduce building weight, reduction in the cost of integrated building, moreover, prolong building's life.

2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 100 mm walls can reach to 4 hours fire resistance, 300mm thick up wall can reach to 9 hours fire resistance.

3. Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 100mm thick wall up to 41 db.

4. Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.

5. Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles.

6. Anti-seismic: The same building structure, improve the two seismic than the brick level.

7. Green: Manufacturing, transportation, all use the process of non-pollution, to protect arable land, saving energy, is one kind of a green building material.



Main Process Flow of AAC Block Production Line:

1. Dose and match measured raw materials;
2. After distributing, feed raw material into pouring mixer to make slurry.
3. Through thoroughly mixing, the slurry is poured to mould; ,
4. After pre-curing under a certain temperature and time, the block would reach a certain hardness and prepare for cutting;
5. Tilting hoister would turn over 90 degrees of mould;
6. Then open the mould and separate it from block. And take the block with side plate to the cutting cart;
7.  The horizontal cutting machine cuts blocks from both sides.
8.  Then the vertical cutting;
9. After cutting, the block is hanged to curing carts with side plate by semi-finished product hoister;
10. Grouping the carts and put them into autoclaves;
11. Curing the blocks under certain temperature and pressure;
12. Carry the finished product out of autoclave by the winch.
13. The finished product hoister take the finished product to finished blocks area;
14. The side plate return back through side plate roller;
15. Side plate would be organized with open mould for the next circle.
Raw Material For AAC light weight blocks :
 

Fly ash style aerated block raw material		Sand style aerated block raw material
Parameter Name	Parameter Value	Parameter Name	Parameter Value
Fly ash	65-70%	Sand	55-65%
cement	6-15%	cement	10-20%
Lime	18-25%	Lime	20-30%
Gypsum	3-5%	Gypsum	2-3%
Aluminum powder paste	8	Aluminum powder paste	8
Water & material rate	0.60-0.65	Water & material rate	0.65-0.75
Casting temperature	36-40°C	Casting temperature	35-38°C
Aluminum mixing time	30-40s	Aluminum mixing time	30-40s

AAC Blocks Machinery:

 

FAQ

1. who are we?
We are based in Shandong, China, professional manufacturing factory in aac plant ,concrete block making machine for more than 20 years.

2. how can we guarantee quality?
Always compelte Inspection before shipment;

3.what can you buy from us?
Block Making Machinery,AAC Block Equipment,Metal .
Factory Profile: